Setting the Screensaver

The screensaver features the Channel label and is enabled by default. The display screens enter screensaver mode when the Remote Station has been inactive for 10 minutes.

Tip: To exit screensaver mode, press any key on the front.

To enable or disable the screensaver:

  1. In Menu mode, select Station Settings and then Display.

  1. From the third menu, select Screensaver.

  2. From the fourth menu, select:

  • Channel Name (default)

  • Hostname

  • Role Name

  • Blank

  • Disabled

  1. To confirm the selected setting, press the rotary control.